Characteristics of breaking irregular wave forces on a monopile     

《Applied Ocean Research》2019

The substructures of offshore wind turbines are subjected to extreme breaking irregular wave forces. The present study is focused on investigating breaking irregular wave forces on a monopile using a computational fluid dynamics (CFD) based numerical model. The breaking irregular wave forces on a monopile mounted on a slope are investigated with a numerical wave tank. The experimental and numerical irregular free surface elevations are compared in the frequency-domain for the different locations in the vicinity of the cylinder. A numerical analysis is performed for different wave steepness cases to understand the influence of wave steepness on the breaking irregular wave loads. The wave height transformation and energy level evolution during the wave shoaling and wave breaking processes is investigated. The higher-frequency components generated during the wave breaking process are observed to play a significant role in initiating the secondary force peaks. The free surface elevation skewness and spectral bandwidth during the wave transformation process are analysed and an investigation is performed to establish a correlation of these parameters with the breaking irregular wave forces. The role of the horizontal wave-induced water particle velocity at the free surface and free surface pressure in determining the breaking wave loads is highlighted. The higher-frequency components in the velocity and pressure spectrum are observed to be significant in influencing the secondary peaks in the breaking wave force spectrum.  相似文献   

Study of irregular wave run-up over fringing reefs based on a shock-capturing Boussinesq model     

《Applied Ocean Research》2019

This paper presents the results of a parametric study of irregular wave run-up over fringing reefs using the shock-capturing Boussinesq wave model Funwave-TVD to better understand the role of fringing reefs in the mitigation of wave-driven flooding. Laboratory experiments were newly performed with a typical fringing reef profile and typical hydrodynamic conditions to validate the model. Experimental data shows irregular wave run-ups are dominated by the low-frequency motions and confirms the run-up resonant phenomenon over the back-reef slope, which has been revealed in previous numerical studies. It is demonstrated that irregular wave evolution and run-up over fringing reefs are reasonably reproduced by the present model with a proper grid size. However, the infragravity run-up height and highest 2% run-up height over the back-reef slope are under-predicted due to the underestimation of the infragravity wave height over the reef flat. The validated model was then utilized to model irregular wave transformations and run-ups under different conditions. Through a series of numerical experiments, the effects of key hydrodynamic and reef geometry parameters, including the reef flat width, water depth over the reef flat, fore-reef slope angle and back-reef slope angle, on the irregular wave run-up were investigated. Variations of spectral components of irregular wave run-ups were examined to better understand the physical process underlying the effect of each parameter.  相似文献   

Wave energy conversion under constrained wave-by-wave impedance matching with amplitude and phase-match limits     

《Applied Ocean Research》2019

This paper investigates an approach to limit the fullness of ‘tuning’ provided by wave-by-wave impedance matching control of wave energy devices in irregular waves. A single analytical formulation based on the Lagrange multiplier approach of Evans [1] is used to limit the velocity amplitude while also limiting the closeness of the phase match between velocity and exciting force. The paper studies the effect of the present technique in concurrently limiting the device velocity and the required control/actuation force. Time domain application requires wave-profile prediction, which here is based on a deterministic propagation model. Also examined in the time domain is the effect of possible violation of the displacement constraint, which for many designs implies impacts at hard stops within the power take-off mechanism. Time domain simulations are carried out for a 2-body axisymmetric converter (with physical end-stops) in sea states reported for a site off the US east coast. It is found that the approach leads to effective power conversion in the less energetic sea states, while as desired, considerable muting of the optimal response is found in the larger sea states. Under the assumptions of this work, the end-stop collisions are found to have a minor effect on the power conversion. The present approach could be used to guide the design of power take-off systems so that their displacement stroke, maximum force, and resistive and reactive power limits are well-matched to the achievable performance of a given controlled primary energy converter.  相似文献   

基于卷积完全匹配层的非规则网格时域有限元探地雷达数值模拟   总被引：2，自引：2，他引：0       下载免费PDF全文

冯德山  王珣 《地球物理学报》2017,60(1):413-423

复频移完全匹配层(Complex Frequency-Shifted PML,CFS-PML)在长时间时域计算中对凋落波、倏失波具有好的吸收效果,并被广泛应用于时域有限差分模拟中.而本文采用卷积方法将CFS-PML应用于时域有限元求解GPR波动方程的数值模拟中.论文以TM波为例,推导了基于CPML(Convolutional PML)边界的时域有限元GPR波动方程求解公式,采用Newmark-β方法对时间导数进行离散,有效改善了时域有限元GPR数值计算程序的稳定性.并以狭长模型为例,开展了CPML边界中关键参数m、R和κ的选取实验,通过对比反射误差大小确定了综合最优参数组合.相同时刻UPML与CPML波场快照、3个检测点的反射误差比较,说明CPML较UPML具有更好的吸收效果.最后,采用非规则四边形网格对1个复杂GPR模型进行剖分,应用加载CPML边界条件的FETD程序对该模型进行了正演,得到了二维剖面法、宽角法正演GPR剖面图,说明非规则四边形对复杂模型的良好适应性,基于CPML边界条件的FETD可有效减少边界反射误差,能实现对任意复杂不规则模型的正演模拟.  相似文献   

Effect of roll modelling in beam waves under multi-frequency excitation     

G. Bulian  A. Francescutto 《Ocean Engineering》2011,38(13):1448-1463

  相似文献   

Separation of obliquely incident and reflected irregular waves by the Morlet wavelet transform   总被引：1，自引：0，他引：1  

Yuxiang Ma  Guohai Dong  Xiaozhou Ma 《Coastal Engineering》2011

An existing 2D time-domain method for separating irregular incident and reflected waves by wavelet transform [Ma et al., 2010. A new method for separation of 2D incident and reflected waves by the Morlet wavelet transform. Coastal Eng., 57(6):597–603] is extended to account for obliquely incident irregular waves propagating over sloping bottoms. The linear shoaling and refraction coefficients are adopted to determine the amplitude and phase changes of waves. The optimal central frequency of the Morlet wavelet is determined by the minimum Shannon wavelet entropy. Numerical tests show that the present method can accurately separate waves over horizontal depths. For waves at sloping bottoms, however, the separation errors increase as bottom slope increases and are significant for waves with incident angle larger than π/3.  相似文献   

Mass Fractions of S,Cu, Se,Mo, Ag,Cd, In,Te, Ba,Sm, W,Tl and Bi in Geological Reference Materials and Selected Carbonaceous Chondrites Determined by Isotope Dilution ICP‐MS          下载免费PDF全文

Zaicong Wang  Harry Becker  Frank Wombacher 《Geostandards and Geoanalytical Research》2015,39(2):185-208

Mass fractions of S, Cu, Se, Mo, Ag, Cd, In, Te, Ba, Sm, W and Tl were determined by isotope dilution sector field ICP‐MS in the same sample aliquot of reference materials using HF‐HNO₃ digestion in PFA beakers in pressure bombs and glassy carbon vessels in a high‐pressure asher (HPA‐S) for comparison. Additionally, Bi was determined by internal standardisation relative to Tl. Because isobaric and oxide interferences pose problems for many of these elements, efficient chromatographic separation methods in combination with an Aridus desolvator were employed to minimise interference effects. Repeated digestion and measurement of geological reference materials (BHVO‐1, BHVO‐2, SCo‐1, MAG‐1, MRG‐1 and UB‐N) gave results with < 5% relative intermediate precision (1s) for most elements, except Bi. Replicates of NIST SRM 612 glass digested on a hot plate were analysed by the same methods, and the results agree with reference values mostly within 2% relative deviation. Data for the carbonaceous chondrites Allende, Murchison, Orgueil and Ivuna are also reported. Digestion in a HPA‐S was as efficient as in pressure bombs, but some elements displayed higher blank levels following HPA‐S treatment. Pressure bomb digestion yielded precise data for volatile S, Se and Te, but may result in high blanks for W.  相似文献   

Determination of Ga,Ge, Mo,Ag, Cd,In, Sn,Sb, W,Tl and Bi in USGS Whole‐Rock Reference Materials by Standard Addition ICP‐MS          下载免费PDF全文

Richard M. Gaschnig  Roberta L. Rudnick  William F. McDonough 《Geostandards and Geoanalytical Research》2015,39(3):371-379

A procedure for determining a wide range of chalcophile and siderophile elements in typical crustal rocks using standard addition and ICP‐SFMS (inductively coupled plasma sector field mass spectrometry) is presented. New results for Ga, Ge, Mo, Ag, Cd, In, Sn, Sb, W, Tl and Bi abundances in USGS whole‐rock reference materials AGV‐2, BHVO‐1, BIR‐1, G‐2, GSP‐1 and W‐2 are reported using this analytical procedure. Intermediate precision of means based on multiple dissolved aliquots of each USGS reference material was 10% RSD or better for Ga, Ge, In and Sn in all, and similarly good for Ag, Cd, Sb, Tl and Bi in most reference materials. Poorer intermediate precision of Mo and W measurements in several reference materials is probably due to higher analytical blanks on these elements and powder heterogeneity due to a sulfide‐related nugget effect in the specific case of Mo in GSP‐1. Results for all elements fell within the range of available published data with the exception of Ag, which yielded systematically higher concentrations than found in the literature for five of the six reference materials, likely reflecting interference from unresolved polyatomic species.  相似文献   

Power capture performance of an oscillating-body WEC with nonlinear snap through PTO systems in irregular waves     

《Applied Ocean Research》2015

Compared with solar and wind energy, wave energy is a kind of renewable resource which is enormous and still under development. In order to utilize the wave energy, various types of wave energy converters (WECs) have been proposed and studied. And oscillating-body WEC is widely used for offshore deployment. For this type of WEC, the oscillating motion of the floater is converted into electricity by the power take off (PTO) system, which is usually mathematically simplified as a linear spring and a damper. The linear PTO system is characteristic of frequency-dependent response and the energy absorption is less powerful for off resonance conditions. Thus a nonlinear snap through PTO system consisting of two symmetrically oblique springs and a linear damper is applied. A nonlinear parameter γ is defined as the ratio of half of the horizontal distance between the two oblique springs to the original length of both springs. JONSWAP spectrum is utilized to generate the time series of irregular waves. Time domain method is used to establish the motion equation of the oscillating-body WEC in irregular waves. And state space model is applied to replace the convolution term in the time domain motion equation. Based on the established motion equation, the motion response of both the linear and nonlinear WEC is numerically calculated using 4th Runge–Kutta method, after which the captured power can be obtained. Then the influences of wave parameters such as peak frequency, significant wave height, damping coefficient of the PTO system and the nonlinear parameter γ on the power capture performance of the nonlinear WEC is discussed in detail. Results show that compared with linear PTO system, the nonlinear snap through PTO system can increase the power captured by the oscillating body WEC in irregular waves.  相似文献   

ȱʧ�����»���EM�㷨��GPS�߳����     

林东方  宋迎春  杜琨  肖琴琴 《大地测量与地球动力学》2012,32(2):139-142

GPS????????????????????????????????????????????????????????????????????????ó??淽?????????????????????????????EM?????????????????????????????????????????????????????Ч????????????μ?GPS??????????  相似文献